Magmaweld Welding and Cutting


Go to content

Main menu:


PRODUCTS > Welding Machines

MPM 15/400 I-CL

   

Welding and Electricity Generators for Sites Without Electricity For Welding with All Electrodes and For Cutting with Carbon Electrode.

Operates with diesel fuel. Provides auxiliary output of 400 V / 50 Hz (3~),
230 V / 50 Hz (1~), 48 V / 50 Hz (1~) along with DC welding current.

Features superior arc characteristics for all Rutile, Basic and Cellulosic coated electrodes.
Performs cutting with MPM 15/400 6 mm and MPM 20/500P 10 mm carbon electrode.
CC/CV (Vertical/Horizontal) characteristic option available. Thus the welding generator supports these methods when proper MIG/MAG and TIG apparatus are connected.(Optional)
Performs welding and cutting with long welding cables without loss of performance.
Current setting is adjusted on the machine by means of potentiometer.
Ampere, volts, fuel level and operating hours indicators are located on the front panel of the machine.
Suitable for outdoor use and covered by IP 23 protection class.
It is easily moved within sites by means of its large wheeled trailer and it can be lifted by means of its central hook. (Standard for MPM 15/400 I-CL and optional for other models.)
Its diesel engine is air cooled. It contains 12 volts built-in accumulator and automatically starts-up by means of key. Automatically switches to idle at no-load.
Features low fuel level, low oil pressure, battery charge failure, leakage current protection. Features thermal protection against overheating.


CLICK FOR DETAILS

   

Approvals ande Certificates

Genset Brochure

   
   

MPM 15/400 I-KA

   

Welding and Electricity Generators for Sites Without Electricity For Welding with All Electrodes and For Cutting with Carbon Electrode.

Operates with diesel fuel. Provides auxiliary output of 400 V / 50 Hz (3~),
230 V / 50 Hz (1~), 48 V / 50 Hz (1~) along with DC welding current.

Features superior arc characteristics for all Rutile, Basic and Cellulosic coated electrodes.
Performs cutting with MPM 15/400 6 mm and MPM 20/500P 10 mm carbon electrode.
CC/CV (Vertical/Horizontal) characteristic option available. Thus the welding generator supports these methods when proper MIG/MAG and TIG apparatus are connected. (Optional)
Performs welding and cutting with long welding cables without loss of performance.
Current setting is adjusted on the machine by means of potentiometer.
Ampere, volts, fuel level and operating hours indicators are located on the front panel of the machine.
Suitable for outdoor use and covered by IP 23 protection class.
It is easily moved within sites by means of its large wheeled trailer and it can be lifted by means of its central hook. (Standard for MPM 15/400 I-CL and optional for other models.)
Its diesel engine is air cooled. It contains 12 volts built-in accumulator and automatically starts-up by means of key. Automatically switches to idle at no-load.
Features low fuel level, low oil pressure, battery charge failure, leekage current protection. Features thermal protection against overheating.



CLICK FOR DETAILS

Approvals and Certificates

Genset Brochure

   
   
   

MPM 20/500 P

   

Welding and Electricity Generators for Sites Without Electricity For Welding with All Electrodes and For Cutting with Carbon Electrode.

Operates with diesel fuel. Provides auxiliary output of 400 V / 50 Hz (3~),
230 V / 50 Hz (1~), 48 V / 50 Hz (1~) along with DC welding current.

Features superior arc characteristics for all Rutile, Basic and Cellulosic coated electrodes.
Performs cutting with MPM 15/400 6 mm and MPM 20/500P 10 mm carbon electrode.
CC/CV (Vertical/Horizontal) characteristic option available. Thus the welding generator supports these methods when proper MIG/MAG and TIG apparatus are connected. (Optional)
Performs welding and cutting with long welding cables without loss of performance.
Current setting is adjusted on the machine by means of potentiometer.
Ampere, volts, fuel level and operating hours indicators are located on the front panel of the machine.
Suitable for outdoor use and covered by IP 23 protection class.
It is easily moved within sites by means of its large wheeled trailer and it can be lifted by means of its central hook. (Standard for MPM 15/400 I-CL and optional for other models.)
Its diesel engine is air cooled. It contains 12 volts built-in accumulator and automatically starts-up by means of key. Automatically switches to idle at no-load.

Features low fuel level, low oil pressure, battery charge failure, leekage current protection. Features thermal protection against overheating.


CLICK FOR DETAILS

Genset Brochure

   
   
   
   

MPM 500 P

   

Welding and Electricity Generators for Sites Without Electricity For Welding with All Electrodes and For Cutting with Carbon Electrode.

Operates with diesel fuel. Provides auxiliary output of 230 V / 50 Hz (1~)along with DC welding current.
Features superior arc characteristics for all Rutile, Basic and Cellulosic coated electrodes.
Performs cutting with MPM 15/400 6 mm and MPM 20/500P 10 mm carbon electrode.
CC/CV (Vertical/Horizontal) characteristic option available. Thus the welding generator supports these methods when proper MIG/MAG and TIG apparatus are connected. (Optional)
Performs welding and cutting with long welding cables without loss of performance.
Current setting is adjusted on the machine by means of potentiometer.
Ampere, volts, fuel level and operating hours indicators are located on the front panel of the machine.
Suitable for outdoor use and covered by IP 23 protection class.
It is easily moved within sites by means of its large wheeled trailer and it can be lifted by means of its central hook. (Standard for MPM 15/400 I-CL and optional for other models.)
Its diesel engine is air cooled. It contains 12 volts built-in accumulator and automatically starts-up by means of key. Automatically switches to idle at no-load.

Features low fuel level, low oil pressure, battery charge failure, leekage current protection. Features thermal protection against overheating.


CLICK FOR DETAILS

Genset Brochure

   
   
   
   

Back to content | Back to main menu