Magmaweld Welding and Cutting


Go to content

Main menu:


PRODUCTS > Welding Consumables > SAW Submerged Arc Welding Wires and Fluxes

SI 308L

AWS/ASME SFA-5.9

ER 308L

 



Austenitic stainless steel welding wire for submerged arc welding of unstabilized or stabilized corrosion resisting Cr-Ni steels tanks, pipes and equipments, used in food, beverage and pharmaceutical industries. SI 308L is used in combination with SF 500 submerged arc welding flux. Resistant to intergranular corrosion up to 350C. Non-scaling up to 800C, in air or oxidizing combustion gases.

CLICK FOR DETAILS

EN ISO 14343

S19 9 L

TS EN ISO 14343

S19 9 L

DIN M No:

1.4316

   
   

SI 309L

AWS/ASME SFA-5.9

ER 309L

 


Austenitic-ferritic wire electrode for submerged arc welding of stainless steels to unalloyed or low-alloyed steels, subjected to operating temperatures up to 300C. SI 309L is used in combination with SF 500 submerged arc welding flux. Low carbon content increases resistance to intergranular corrosion. Suitable to use also for buffer layer on carbon steel before welding with 308 and 308L to reach 304 and 304L surface layer.

CLICK FOR DETAILS

EN ISO 14343-A

S23 12 L

TS EN ISO 14343-A

S23 12 L

DIN M No:

1.4332

   
   

SI 316L

AWS/ASME SFA-5.9

ER 316L

 


Austenitic stainless steel welding wire for submerged arc welding of unstabilized or stabilized high corrosion resisting Cr-Ni-Mo stainless steels. SI 316L is used in combination with SF 500 submerged arc welding flux. Due to it's low carbon content, resistant to intergranular corrosion up to 400C. Especially used in welding tanks, pipes and equipments which are used in chemical, petrochemical, paint, paper and shipbuilding industries, etc.

CLICK FOR DETAILS

EN ISO 14343

S19 12 3 L

TS EN ISO 14343

S19 12 3 L

DIN M No:

1.4430

   
   

SI 2209

AWS/ASME SFA-5.9

ER 2209

 



Dublex (ferritic-austenitic) stainless steel wire electrode for submerged arc welding of dublex Cr-Ni-Mo stainless steels. SI 2209 is used in combination with SF 500 submerged arc welding flux. Especially used in welding of acid tanks and pipes, in chemical, petrochemical, paper, shipbuilding and desalination industries. Suitable also for welding dublex stainless steels to carbon steels. High-strength and ductile weld metal exhibits good resistance to pitting, crevice corrosion and stress corrosion cracking in chloride-bearing media.

CLICK FOR DETAILS

EN ISO 14343-A

S22 9 3 L

TS EN ISO 14343-A

S22 9 3 L

DIN M No:

1.4462

   
   

Back to content | Back to main menu