Magmaweld Welding and Cutting


Go to content

Main menu:


Hardfacing Applications

PRODUCTS > Welding Consumables > SAW Submerged Arc Welding Wires and Fluxes

SHF 325

EN ISO 14714

S A CS3

Agglomerated, alloyed flux used for hardfacing purposes in combination with SW 702 wire electrode. Suitable for hardfacing of machine gear parts, rails, supports rolls of caterpillars, pulleys, etc. Possible to use both in alternative and direct currents. The alloying effect of the flux depends, to a large degree, on the welding parameters chosen. For instance, optimum welding parameters for 4.00 mm wire electrode are about 600 A, 32 V, 50 cm/min. welding speed.

CLICK FOR DETAILS

TS EN ISO 14714

S A CS3

   
   
   
   

SHF 335

EN ISO 14714

S A CS3

Agglomerated and alloyed flux used for hardfacing purposes in combination with SW 701 wire electrode. Suitable for hardfacing of couplings, piston rod ends, earth moving equipment, rolls, mills, etc. the alloying effect to the flux depends, to a large degree, on the weld parameters chosen. For instance, optimum welding parameters for 4.00 mm wire electrod are about 600 A, 32 V, 500 cm/min. welding speed.

CLICK FOR DETAILS

TS EN ISO 14714

S A CS3

   
   
   
   

SHF 345

EN ISO 14714

S A CS3

Agglomerated, alloyed flux used for hardfacing purposes in combination with SW 702 wire electrode. Suitable for hardfacing of pinchrolls, sinter crushers etc. Possible to use both in alternative and direct currents. The alloying effect of the flux depends, to a large degree, on the weld parameters chosen. For instance, optimum welding parameters for 4.00 mm wire electrode are about 600 A, 32 V, 50 cm/min. welding speed.


CLICK FOR DETAILS

TS EN ISO 14714

S A CS3

   
   
   
   

Back to content | Back to main menu