Welcome to MAGMAWELD web site!
Unalloyed wire electrode for GTAW of unalloyed and low-alloy steels by using Argon shielding gas. Characterized by a reduced slag formation and smooth welding deposit. Particularly suitable for welding of galvanized and pre-painted steels, welding low alloy steels in pipe-lines, boilers and tank construction. Suitable also welding in thin metal plates and repair welds.
Unalloyed welding rod for TIG-welding of general structural steels and pipe steels. TG 2 must be welded by using pure Argon (Ar) shielding gas. Thin and homogeneous copper coating increase resistance to rusting.
Low-alloy welding rod for TIG-welding of general structural steels and pipe steels. TG 3 must be welded by using pure Argon (Ar) shielding gas. Thin and homogeneous copper coating increase resistance to rusting.
Low-alloy wire electrode for GTAW of unalloyed and low-alloy steels by using Argon shielding gas. Due to it's Ti and Al micro alloy contents, particularly suitable for single pass welding of galvanized, pre-painted, rusty and dirty steels, welding low alloy steels in pipe-lines, boilers and tank construction. Suitable also welding in thin metal plates and repair welds.
Low carbon steel welding rod for oxy-acetylene welding. It is a general purpose rod for welding low carbon steels and wrought iron with the required tensile strenght does not exceed 310 N/mm². Generally used for automotive repair works like tears and rips in the body or patching on badly damaged parts, joining steel sheets and plates, tubing and piping installation where and intense heat source is required for straightening, forming, preheating post weld heat treatment, regardless of the complexity and position in which welding has to be done. Weld metal has got good ductility and machinability. Welding shall be performed in neutral flame characteristics. It has got a fluid weld puddle.
Low carbon steel welding rod, for oxy-acetylene gas welding, containing slightly higher manganese. It is a general purpose welding rod with medium strength, used for welding carbon steels and low alloy steels with tensile strenghts up to 410 N/mm². Commonly used for carbon steel pipe installation and repair works in power plants, process piping, machine and agricultural tool repair, joining steel plates and wrought irons, filling holes and edged on wrought iron, where an intense heat source is required for straightening, forming, preheating post weld heat treatment, regardless of the complexity and position in which welding has to be done. Welding shall be performed in neutral flame characteristics. It has got a fluid weld puddle.