Magmaweld Welding and Cutting


Go to content

Main menu:


PRODUCTS > Welding Machines > TIG Welders

Monotig 160ip

Standards

EN 60974-1
EN 60974-10


Portable Professional DC TIG Welding Inverters For Steel, Stainless Steel & Copper
Inverter Technology for Production & Repair of thin Metals

Operates with 1 Phase 230V-50/60Hz networks & generators. Tolerates voltage flactuations upto 15 %.
TIG arc ignition by HF or Soft - Touch.
Good thin metal welding, due to its fine pulsing capability up to 2 khz.
Enhanced TIG controls; pre-gas, slope-up, main current, pulse frequency, pulse duty cycle, base current slope down, post-gas, crater filling settings.
10 Job Storage.
Trigger latching. (2/4)
Precise monitoring of welding parameters via digital display.
Professional torch and foot usage for triggering.
Especially designed for outdoor use, protection class is IP23S.
Light weight, easy to carry but rugged design to last long in tough working conditions.
Fan cooled and thermally protected against overloading.


CLICK FOR DETAILS

Approvals and Certificates

User Manuel

   
   
   

Monotig 160i Basic

Standards

EN 60974-1
EN 60974-10


Portable Semi Professional TIG and MMA Welding Inverter For Steel & Stainless Steel
Inverter Technology for Workshops.

Operates with 1 Phase 230V-50/60Hz networks & generators. Tolerates voltage flactuations upto %15.
Good thin metal welding , due to its stable low current starting from 10 Amp.
TIG arc ignition by Soft-Tocuh. No HF.
Professional torch and foot pedal for triggering.
Especially designed for outdoor use, protection class is IP23S.
Light weight, easy to carry but rugged design to last long in tough working conditions.
No performance loss with long mains and welding cables.
Fan cooled, protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates

User Manuel

   
   
   

Monotig 200i

Standards

EN 60974-1
EN 60974-10


Portable Professional DC TIG Welding Inverters For Steel, Stainless Steel & Copper
Inverter Technology for Production & Repair of Thin Metals

Operates with 1 Phase 230V-50/60Hz Networks & Generators, Tolerates voltage flactuation up to % 15.
TIG arc ignition by HF or Soft-Touch.
Excellent thin metal welding, due to its stable low current starting from 5 Amp.
Standard TIG controls, current, slope down, post gas and crater filling.
Trigger latching.(2/4)
Precise monitoring of welding parameters via digital display.
Professional torch and foot pedal for triggering.
Especially designed for outdoor use, protection class is IP 23S.
Light weight, easy to carry but rugged design to last long in tough working conditions.
Fan cooled and thermally protected against overloading.


CLICK FOR DETAILS

Approvals and Certificate

   

User Manual

   
   

Back to content | Back to main menu