Magmaweld Welding and Cutting


Go to content

Main menu:


PRODUCTS > Welding Machines > MIG/MAG (GMAW) Welders

RS 200 MK

Standards

EN 60974-1
EN 60974-10


Industrial Compact DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 400 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Built-in wire feeding system for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
The 4-wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage, wire feed speed are adjusted from the front panel. Welding voltage and current are monitored on the digital displays.Optimum welding parameters could be selected from the chart on the front panel.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2 / 4) switch and manual wire feeding button for threading.
According to the machine capacity 2nd and 3rd work-piece outlets for lew spolter welding.
Suitable for indoor use, protection class is IP21.
Built-in with trolly with gas bottle platform with 220V / 10 A standard electric socket for CO2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

RS 250 MK

Standards

EN 60974-1
EN 60974-10


Industrial Compact DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 400 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Built-in wire feeding system for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
The 4-wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage, wire feed speed are adjusted from the front panel. Welding voltage and current are monitored on the digital displays.Optimum welding parameters could be selected from the chart on the front panel.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2 / 4) switch and manual wire feeding button for threading.
According to the machine capacity 2nd and 3rd work-piece outlets for lew spolter welding.
Suitable for indoor use, protection class is IP21.
Built-in with trolly with gas bottle platform with 220V / 10 A standard electric socket for CO2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

   

Approvals and Certificates



RoHS

User Manuel

   
   

RS 300 MK

Standards

EN 60974-1
EN 60974-10


Industrial Compact DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 400 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Built-in wire feeding system for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
The 4-wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage, wire feed speed are adjusted from the front panel. Welding voltage and current are monitored on the digital displays.Optimum welding parameters could be selected from the chart on the front panel.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2 / 4) switch and manual wire feeding button for threading.
According to the machine capacity 2nd and 3rd work-piece outlets for lew spolter welding.
Suitable for indoor use, protection class is IP21.
Built-in with trolly with gas bottle platform with 220V / 10 A standard electric socket for CO2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

RS 350 MK

Standards

EN 60974-1
EN 60974-10


Industrial Compact DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 400 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Built-in wire feeding system for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
The 4-wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage, wire feed speed are adjusted from the front panel. Welding voltage and current are monitored on the digital displays.Optimum welding parameters could be selected from the chart on the front panel.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2 / 4) switch and manual wire feeding button for threading.
According to the machine capacity 2nd and 3rd work-piece outlets for lew spolter welding.
Suitable for indoor use, protection class is IP21.
Built-in with trolly with gas bottle platform with 220V / 10 A standard electric socket for CO2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

 


Approvals and Certificates

RoHS

User Manuel

   
   

RS 400 MK

Standards

EN 60974-1
EN 60974-10


Industrial Compact DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 400 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Built-in wire feeding system for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
The 4-wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage, wire feed speed are adjusted from the front panel. Welding voltage and current are monitored on the digital displays.Optimum welding parameters could be selected from the chart on the front panel.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2 / 4) switch and manual wire feeding button for threading.
According to the machine capacity 2nd and 3rd work-piece outlets for lew spolter welding.
Suitable for indoor use, protection class is IP21.
Built-in with trolly with gas bottle platform with 220V / 10 A standard electric socket for CO2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

RS 200 M

Standards

EN 60974-1
EN 60974-10

Industrial DC MIG / MAG Welding Machine For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 380 V / 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedabiity with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box. Welding voltage and current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding button for threading.
For low spatter welding, according to the machine capacity 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, protection class IP21.
Built-in trolly with gas bottle platform with 220V / 10A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

   

Approvals and Certificates



RoHS

User Manual

   

RS 250 M

Standards

EN 60974-1
EN 60974-10

Industrial DC MIG / MAG Welding Machine For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 380 V / 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedabiity with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box. Welding voltage and current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding button for threading.
For low spatter welding, according to the machine capacity 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, protection class IP21.
Built-in trolly with gas bottle platform with 220V / 10A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

   

Approvals and Certificates



RoHS

User Manual

   

RS 300 M

Standards

EN 60974-1
EN 60974-10


Industrial DC MIG / MAG Welding Machine For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 380 V / 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedabiity with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box. Welding voltage and current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding button for threading.
For low spatter welding, according to the machine capacity 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, protection class IP21.
Built-in trolly with gas bottle platform with 220V / 10A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

RS 350 M

Standards

EN 60974-1
EN 60974-10

Industrial DC MIG / MAG Welding Machine For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 380 V / 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedabiity with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box. Welding voltage and current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding button for threading.
For low spatter welding, according to the machine capacity 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, protection class IP21.
Built-in trolly with gas bottle platform with 220V / 10A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

 

Approvals and Certificates

RoHS

User Manuel

   

RS 400 M

Standards

EN 60974-1
EN 60974-10


Industrial DC MIG / MAG Welding Machine For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer-Rectifier Technology for Production

Operates with 3 Phase 380 V / 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedabiity with longer torches and less deformation of delicate wires like aluminium and flux cored wires.
Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box. Welding voltage and current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding button for threading.
For low spatter welding, according to the machine capacity 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, protection class IP21.
Built-in trolly with gas bottle platform with 220V / 10A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates




RoHS

User Manuel

   
   
   

RS 350 MW

Standards

EN 60974-1
EN 60974-10


Industrial Water Cooled DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer - Rectifier Technology for Heavy Duty Production

Operates with 3 Phase 380 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long.Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedability with longer toches and less deformation of delicate wires like aluminium and fluxcored wires.
For RS Models: Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box.Welding voltage & current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding buttton for threading.
For low spatter welding, according to the current range 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, Protection Class is IP21.
Seperate robust water cooling unit able to support in warm climates and long harness.
Built-in trolly with gas bottle platform with 220 V / 10 A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates

User Manual

   
   
   

RS 400 MW

Standards

EN 60974-1
EN 60974-10


Industrial Water Cooled DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer - Rectifier Technology for Heavy Duty Production

Operates with 3 Phase 380 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long.Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedability with longer toches and less deformation of delicate wires like aluminium and fluxcored wires.
For RS Models: Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box.Welding voltage & current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding buttton for threading.
For low spatter welding, according to the current range 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, Protection Class is IP21.
Seperate robust water cooling unit able to support in warm climates and long harness.
Built-in trolly with gas bottle platform with 220 V / 10 A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.


CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

RS 500 MW

Standards

EN 60974-1
EN 60974-10


Industrial Water Cooled DC MIG / MAG Welding Machines For All Types of Metals ( Steel, Stainless Steel, Aluminium Etc.)
Step Controlled Transformer - Rectifier Technology for Heavy Duty Production

Operates with 3 Phase 380 V - 50 Hz.
Excellent welding characteristics with all types of solid and flux cored wires.
Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
Standard harness between wire feeder box and the base machine is 5m long.Upon request this could be extended upto 20m.
The 4-wheel drive system assures good feedability with longer toches and less deformation of delicate wires like aluminium and fluxcored wires.
For RS Models: Welding voltage is adjusted from the front panel of the base machine and wire feed speed is adjusted on the front panel of the wire feeder box.Welding voltage & current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
Trigger latching (2/4) switch and manual wire feeding buttton for threading.
For low spatter welding, according to the current range 2nd and 3rd work-piece outlets are provided.
Suitable for indoor use, Protection Class is IP21.
Seperate robust water cooling unit able to support in warm climates and long harness.
Built-in trolly with gas bottle platform with 220 V / 10 A standard electric socket for CO
2 gas heaters.
Strong outer case made by 1.5 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
Fan cooled and protected against overheating.



CLICK FOR DETAILS

Approvals and Certificates



RoHS

User Manuel

   
   
   

Back to content | Back to main menu