AWS/ASME SFA - 5.5

E7018-G H4R

EN ISO 2560 - A

E 42 4 Z B 42

TS EN ISO 2560 - A

E 42 4 Z B 42

Basic coated electrode, designed to resist to atmospheric corrosion and to provide high charpy impact energy down to -40°C. Suitable for welding steel constructions like bridge, off-shore platforms which are made of weathering steels and thick sections of them. Especially 2,50 mm and 3,25 mm diameter well suited for positional welding. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E8018-C3

EN ISO 2560 - A

E 46 6 1Ni B 42

TS EN ISO 2560 - A

E 46 6 1Ni B 42

Heavy coated basic type electrode, suitable for welding steel constructions, off-shore platforms, bridge, machinery, production and in their root pass applications where low high strength steels and fine grained structural steels used. Weld metal is high crack resistance under difficult operating conditions such as dynamic loads and especially low enviromental temperatures.

AWS/ASME SFA - 5.5

E8018-W2

EN ISO 2560 - A

E 50 6 Z 1Ni B 42

TS EN ISO 2560 - A

E 50 6 Z 1Ni B 42

Heavy coated basic type electrode, designed for welding weathering steels, like COR-TEN steels, high strength steels, particularly copper containing steels which are resistant to atmospheric corrosion. Due to its high crack resistance under difficult operating conditions such as dynamic loads, high and low enviromental temperatures, suitable to use in fabrication of steel constructions like bridge, stadium, off-shore platforms. Easy to use in root and fill passes. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E8018-G H4

EN ISO 2560 - A

E 50 6 Mn1Ni B 42 H5

TS EN ISO 2560 - A

E 50 6 Mn1Ni B 42 H5

Heavy coated basic type electrode, designed for welding weathering steels, like COR-TEN steels, high strength steels, particularly copper containing steels which are resistant to atmospheric corrosion. Due to its high crack resistance under difficult operating conditions such as dynamic loads, high and low enviromental temperatures, suitable to use in fabrication of steel constructions like bridge, stadium, off-shore platforms. Easy to use in root and fill passes. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E9018-G H4R

EN ISO 18275 - A

E 55 5 Mn1NiMo B T 42 H5

TS EN ISO 18275 - A

E 55 5 Mn1NiMo B T 42 H5

Heavy coated basic type electrode for welding low alloy steels, fine grained structural steels, creep resistant steels and high strength steel pipes. Provides high crack resistance under difficult conditions such as dynamic loads, impact, pressure, vibration and service temperatures between -60°C and +450°C. Weld deposit is of extremely high metallurgical purity and very low hydrogen content. Well-suited for positional welding makes it suitable for welding and repair jobs up to X65 oil and gas pipes. Especially 2,50 mm and 3,25 mm diameter well suited for easy positional welding. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E9018-G H4

EN ISO 2560 - A

E 50 6 Mn1Ni B 42 H5

TS EN ISO 2560 - A

E 50 6 Mn1Ni B 42 H5

Heavy coated basic type electrode for welding low alloy high strength steels, fine grained structural steels and high strength steel pipes. Provides high crack resistance under difficult conditions such as dynamic loads, impact, pressure, vibration and service temperatures between -60°C and +450°C. Weld deposit is of a extremely high metallurgical purity and very low hydrogen content. Electrode features a stable and concentrated arc, rendering it well-suited fore positional welding. Suitable for welding and repair jobs up to X70 oil and gas pipes. Weld are of X-ray quality.

AWS/ASME SFA - 5.5

E8018-C1 H4

EN ISO 2560 - A

E 46 6 2Ni B 42 H5

TS EN ISO 2560 - A

E 46 6 2Ni B 42 H5

Heavy coated basic type electrode for welding fine grained structural steels and especially cryogenic steels, subjected to low service temperatures up to -80°C. Electrode produces tough and crack-free welded joints. Weld deposit is of extremely high metallurgical purity and very low hydrogen content. Owing to high crack resistance under difficult conditions such as dynamic loads, impact, vibration and low service temperatures, it is suitable for use in welding of storage tanks and piping. Electrode features a stable and concentrated arc. Especially 2,50 mm and 3,25 mm diameters are well-suited for positional welding. Welds are X-ray quality.

AWS/ASME SFA - 5.5

E8018-C2

EN ISO 2560 - A

E 46 6 3Ni B 42

TS EN ISO 2560 - A

E 46 6 3Ni B 42

Heavy coated basic type electrode for welding fine grained structural steels and especially cryogenic steels. Electrode produces tough and crack-free welded joints. Weld deposit is of extremely high metallurgical purity and very low hydrogen content. Owing to high crack resistance under difficult conditions such as dynamic loads and low service temperatures up to -150°C. It is suitable for use in welding of storage tanks and piping which are subjected to low temperatures. Electrode features a stable and concentrated arc. Especially 2,50 mm and 3,25 mm diameters are well-suited for positional welding. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E10018-G H4

EN ISO 18275 - A

E 69 4 Mn2NiCrMo B 42 H5

TS EN ISO 18275 - A

E 69 4 Mn2NiCrMo B 42 H5

Heavy coated basic type electrode for welding fine grained structural steels which have yield strength up to 690N/mm², e.g. WELDOX700 and etc. Suitable fore welding high strength steels used in fabrication of cranes, earthmoving and similar heavy construction equipments. Weld deposit is of extremely high metallurgical purity and very low hydrogen content. Electrode features a stable and concentrated arc. Especially 2,50 mm and 3,25 mm diameter well suited for easy positional welding. Welds are of X-ray quality. If normalizing is required after welding, EM 176 should be used. Producing tough and crack-free welded joints.

AWS/ASME SFA - 5.5

E9018-G

EN ISO 18275 - A

E 62 6 Mn2NiMo B 42

TS EN ISO 18275 - A

E 62 6 Mn2NiMo B 42

Heavy coated basic type electrode for welding fine grained and low ally steels which will be subsequently normalized or normalized + tempered after welding. Weld deposit is tough and crack-free and has a low hydrogen content. Especially 2,50 mm and 3,25 mm diameters well duited for easy positional welding. Welds are of X-ray quality.

AWS/ASME SFA - 5.5

E11018-G H4

EN ISO 18275 - A

E 69 6 Mn2NiCrMo B 42 H5

TS EN ISO 18275 - A

E 69 6 Mn2NiCrMo B 42 H5

Heavy coated basic type electrode for welding fine grained and high strength structural steels which have yield strength up to 690N/mm² (e.g. WELDOX700) and tensile strength to 850N/mm². Suitable for welding high strength steels used in fabrications of crane, earthmoving equipment, heavy machinery parts. Due to its high toughness, crack resistance even under difficult operating conditions such as dynamic loads, high and low envriomental temperatures, it is suitable for use is steel constructions, pressure vessels, tanks, boilers and special fabrications and in their root pass applications with safely. Weld deposit is of extremely high metallurgical purity and very low hydrogen content. The electrode features a stable and concentrated arc. Especially 2,50 mm and 3,25 mm diameters well suited for easy positional welding. Welds are of ray quality.

AWS/ASME SFA - 5.5

E8013-G

EN ISO 3580 - A

E Mo R 12

TS EN ISO 3580 - A

E Mo R 12

Rutile type, coated electrode for welding creep resistant steels employed in the construction of pressure vessels, boilers and pipes, subjected to operating temperatures of up to +500°C. Due to its rutile covering, also possible to work in alternatig current (AC). Easy arc striking and re-striking. Very smooth and clean welds, blending into base without undercuts. Preheating, interpass temperature and post-weld heat treatment shall be done according to base metal used.

AWS/ASME SFA - 5.5

E7018-A1 H8

EN ISO 3580 - A

E Mo B 42 H5

TS EN ISO 3580 - A

E Mo B 42 H5

Basic type electrode for welding creep resistant steels employed in the fabrication of pressure vessels, boilers and pipes, subjected to operating temperatures of up to +500°C. Welds are of X-ray quality. Preheating, interpass temperature and post-weld heat treatment shall be done according to base metal used.

AWS/ASME SFA - 5.5

E8013-G

EN ISO 3580 - A

E CrMo1 R 12

TS EN ISO 3580 - A

E CrMo1 R 12

Rutile type, coated electrode for welding creep resistant steels employed in the fabrication of pressure vessels, boilers and pipes, subjected to operating temperatures of up to +570°C. Due to its rutile covering, also possible to work in alternatig current (AC). Easy arc striking and restriking. Very smooth welds, blending into base metal without undercuts. For thick sections basic covered EM 212 shall be preferred. Preheating, interpass temperature and post-weld heat treatment shall be done according to base metal used.

AWS/ASME SFA - 5.5

E8018-B2 H4R

EN ISO 3580 - A

E CrMo1 B 42 H5

TS EN ISO 3580 - A

E CrMo1 B 42 H5

Basic type, coated electrode for welding creep resistant steels employed in the fabrication of pressure vessels, boilers and pipes, subjected to operating temperatures of up to +570°C. Welds are of X-ray quality. Generally preferred in thick sections an where high mechanical properties and X-ray quality are necessary. Preheating interpass temperature and post-weld heat treatment shall be done according to base metal used.

AWS/ASME SFA - 5.5

E9018-B3

EN ISO 3580 - A

E CrMo2 B 42 H5

TS EN ISO 3580 - A

E CrMo2 B 42 H5

Basic type heavy coated electrode for welding creep resistant and high pressure hydrogen resistant steels used in construction of pressure vessels, boiler and piping subjected to operating tempetarures up to 600°C. Generally preferred in thick sections with high mechanical properties and X-ray quality necessary. Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

AWS/ASME SFA - 5.5

E8015-B6 H4R

EN ISO 3580 - A

E CrMo5 B 42 H5

TS EN ISO 3580 - A

E CrMo5 B 42 H5

Basic type electrode for welding creep resistant steels. Weld metal matches the composition of steel grade 12CrMo19-5 featuring equal resistance to high-pressure hydrogen attack, creep resistance and creep rupture strenght. Typical applications are : petrochemical process plants, hydrocrackers in chemical industries. Suitable to use in pressure vessels and boilers subject to operating temperatures up to 600°C. Preheating, interpass temperature and post weld heat treatment should be done in accordance with base metal to be welded.

AWS/ASME SFA - 5.5

E12018-G

Basic type electrode for welding cementation steels and 1% Cr, 2.5% Ni, 0.7% Mo containing steels and cast steels. Suitable to use in machine building and construction of apparatus, as well as for repair welding of components made of similar steels grades. Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

Basic type electrode for welding and building of Cr-Ni-Mo- V containing steels and cast steels with similar composition. Suitable to use in machine building and construction of apparatus, as well as for repair welding of components made of similar steels grades. Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

AWS/ASME SFA - 5.5

E11018-G

Basic type electrode for welding hot work tool steels and cast steels with similar composition, which are subjected to high temperatures up to 550-600°C. Suitable for welding Cr, Mo, V, W containing low alloy steels and hot work tool steels. Also suitable for surfacing and hardfacing on machine parts, forging and drawing dies, shafts which were made of hot work tool steels and similiar compositions. Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

EN ISO 3580 - A

E CrMoV1 B 42 H10

TS EN ISO 3580 - A

E CrMoV1 B 42 H10

Basic type, electrode for Cr-Mo-V type, designed for welding cast steels of identical composition, subjected to operating temperatures of up to +600°C. Suitable for joining and repair purposes on steam turbine parts, valves and seats, pumps, shafts and rolls. Observe specifications as to preheating and post-weld heat treatment to base metal.

AWS/ASME SFA - 5.5

E8015-B8 H4R

EN ISO 3580 - B

E 6215 - 9C1M

EN ISO 3580 - A

E (CrMo9) B 42 H5

Basic type, covered electrode for welding high temperature creep resistant steels type 9Cr-1Mo steels with operating temperatures of up to 625°C. Suitable for welding of boilers and pipes fabrication.

AWS/ASME SFA - 5.5

~E9018-B9 H8

EN ISO 3580 - A

~E CrMo9 B 42 H10

TS EN ISO 3580 - A

~E CrMo9 B 42 H10

Basic type, covered electrode for welding high temperature creep resistant steels type 9Cr-1Mo-V-Nb-N steels with operating temperatures of up to 650°C. Suitable for welding heat excharger pipes and components. Electrode is particularly suited for welding thick walled cast steel components, which are subjected to tempering of 8 hours at 740°C.

AWS/ASME SFA - 5.5

E9015-B91 H4R

EN ISO 3580 - B

E 6215 - 9C1MV

EN ISO 3580 - A

E (CrMo91) B 42 H5

Basic type, covered electrode for welding high temperature creep resistant steels of type 9Cr-1Mo-V-Nb-N with operating temperatures of up to 650°C. Suitable for welding piping and components produced from P91, F91 and T91 steels. Can be used both in thin walled and thick walled pipes and casting successfully.