AWS/ASME SFA - 5.29

E81T1-Ni1C

EN ISO 17632 - A

T46 4 1Ni P C 1

TS EN ISO 17632 - A

T46 4 1Ni P C 1

Rutile type flux cored wire, designed for welding fine grained structural steels. Succesfully used in single and multi-run welding of especially in steel construction, bridge, offshore platform, shipbuilding and pipe laying. Owing to its easily controllable weld pool and fast freezing slag suited for welding in all position easily. It's metal recovery provides ability of good gap bridging and filling property. Because of nickel alloy, weld metal yield and tensile strength is high and weld metal is proper to use on fine grained steels at operating temperatures +450°C down to -40°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag, generally self removed.

AWS/ASME SFA - 5.36

E81T-1 M21A6 Ni1

AWS/ASME SFA - 5.29

E81T1-Ni1M

EN ISO 17632 - A

T46 4 1Ni P M 1 H5

TS EN ISO 17632 - A

T46 4 1Ni P M 1 H5

Rutile type flux cored wire, designed for welding fine grained structural steels by using M21 mix shielding gas. Succesfully used in single and multi-run welding in steel construction, bridge, offshore platform, shipbuilding and pipe laying. Owing to it's easily controllable weld pool and fast freezing slag, suited for welding in all position easily. It's metal recovery provides ability of good gap bridging and filling property. Because of nickel alloy, weld metal yield and tensile strength is high and weld metal is proper to use on fine grained steels at operating temperatures 450°C down to -40°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag and generally self removed.

AWS/ASME SFA - 5.29

E81T1-W2C

EN ISO 17632 - B

T553T1-1C A-NCC1

TS EN ISO 17632 - B

T553T1-1C A-NCC1

Rutile type flux cored wire, which is especially designed for welding weathering steels (like COR-TEN steels), high strength and fine grained structural steels. Suitable for welding in steel construction in single and multi-run welding in all position. Owing to it's easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Has a stable and quite arc with low spatter loss.

AWS/ASME SFA - 5.29

E81T-1 Ni2 C J

EN ISO 17632 - A

T50 6 2Ni P C 2 H5

TS EN ISO 17632 - A

T50 6 2Ni P C 2 H5

Rutile type flux cored wire, designed for welding fine grained structural steels by using CO2 shielding gas. Succesfully used in single and multi-pass welding in steel construction, offshore platform, shipbuilding and pipe laying. Provides weld metal with high toughness, down to -60°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag and generally self removing.

AWS/ASME SFA - 5.29

E81T-1 Ni2 M J

EN ISO 17632 - A

T50 6 2Ni P M 2 H5

TS EN ISO 17632 - A

T50 6 2Ni P M 2 H5

Rutile type flux cored wire, designed for welding fine grained structural steels by using M21 - mix shielding gas. Succesfully used in single and multi-pass welding in steel construction, offshore platform, shipbuilding and pipe laying which need high strength and toughness at low temperatures. Provides weld metal with high toughness, down to -60°C. Diffusible hydrogen content is; 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc without spatter. Has easily removable slag and generally self removing.

AWS/ASME SFA - 5.29

E81T1-A1C

EN ISO 17634 - A

T MoL P C 1 H5

TS EN ISO 17634 - A

T MoL P C 1 H5

Flux cored wire designed for welding boiler, pipe steels, steam generators and other equipments, subjected to operating temperatures up to 500°C. Suitable to use in all position welding and preferred to use where high mechanical properties and X-ray quality are required.