AWS/ASME SFA - 5.20

E71T-1C

EN ISO 17632 - A

T46 2 P C 1

TS EN ISO 17632 - A

T46 2 P C 1

Rutile type flux cored wire with fast-freezing slag. Especially designed for welding with CO2 (carbondioxide) gas, in shipbuilding and steel construction. Owing to its easily controllable weld pool, electrode is well suited for positional welding with higher currents, resulting in increased deposition rates. Particularly suited for welding in the horizontal-vertical position, e.g. in tank welding. Electrode of 1.2 mm in diameter is also suitable for vertical-down welding. Low spatter loss, easy slag removal, finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1C H4

EN ISO 17632 - A

T46 2 P C 1 H5

TS EN ISO 17632 - A

T46 2 P C 1 H5

Rutile type flux cored wire with fast-freezing slag. Especially designed for welding with CO2 (carbondioxide) gas, in shipbuilding and steel construction. Owing to its easily controllable weld pool, electrode is well suited for positional welding with higher currents, resulting in increased deposition rates. Its special vacuum packing provides low diffusible hydrojen level in weld metal, in the case of proper handling and storage conditions. Electrode of 1.20 mm in diameter is also suitable for vertical-down welding. Low spatter loss, easy slag removal in the fillet and norrow grooves, finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1M

EN ISO 17632 - A

T46 2 P M 1

TS EN ISO 17632 - A

T46 2 P M 1

Rutile type flux cored wire, especially designed for welding in steel construction, piping, machine fabrication and shipbuilding by using mix shielding gas. Owing to its easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Good gap-bridging property, low spatter loss, easy slag removal even in narrow grooves. Finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.18

E70C-GM H4

EN ISO 17632 - A

T46 3 M M 2 H5

TS EN ISO 17632 - A

T46 3 M M 2 H5

Slagless metal powder cored electrode with outstanding welding properties in the short-arc and spray arc range. Has high toughness and charpy impact resistance down to -30°C. Almost spatter-free when welding in the spray-arc range with mixed gas. Good restriking, even with cold wire tip, thus being suitable for robot application. Characteristic features high deposition rate and welding speed, good side wall fusion, finely rippled welds, without undercutting into the base metal, not even on contaminated or corroded metal surfaces. Little formation of silicates on weld surface, so that multi-pass welds can be made without cleaning. Due to its easily controlable weld pool in the short-arc range, FCW 20 is well-suited for root-and positional welding and gap bridging. 

AWS/ASME SFA - 5.18

E70C-6M H4

EN ISO 17632 - A

T46 4 M M 2 H5

TS EN ISO 17632 - A

T46 4 M M 2 H5

Slagless metal powder cored electrode with outstanding welding properties in the short-arc and spray arc range. Weld metal has very high toughness and charpy impact resistance, so it is suitable and reliable to use down to -40°C. Almost spatter-free when welding in the spray-arc range with mixed gas. Good restriking, even with cold wire tip, thus being suitable for robot application. Characteristic features high deposition rate and welding speed, good side wall fusion, finely rippled welds, without undercutting into the base metal, not even on contaminated or corroded metal surfaces. Little formation of silicates on weld surface, so that multi-pass welds can be made without cleaning. Due to its easily controlable weld pool in the short-arc range, FCW 21 is well-suited for root-and positional welding and gap bridging. 

AWS/ASME SFA - 5.20

E70T-5M H4

AWS/ASME SFA - 5.20

E70T-5C H4

EN ISO 17632 - A

T42 4 B C 3 H5

EN ISO 17632 - A

T42 4 B M 3 H5

TS EN ISO 17632 - A

T42 4 B M 3 H5

TS EN ISO 17632 - A

T42 4 B C 3 H5

Basic type flux cored wire for welding thick steel sections and dynamically loaded structures, where high toughness is required. Provides high mechanical properties and high crack resistant weld metal. Suitable to welding of boiler, tank, pressure vessel, heavy machine production and heavy constructions. Weld are metallurgically clean and are of X-ray quality. FCW 30 is also suitable for welding high carbon steels and buffer application on worn parts before hardfacing.