AWS/ASME SFA - 5.20

E71T-1C

EN ISO 17632 - A

T46 2 P C 1

TS EN ISO 17632 - A

T46 2 P C 1

Rutile type flux cored wire with fast-freezing slag. Especially designed for welding with CO2 (carbondioxide) gas, in shipbuilding and steel construction. Owing to its easily controllable weld pool, electrode is well suited for positional welding with higher currents, resulting in increased deposition rates. Particularly suited for welding in the horizontal-vertical position, e.g. in tank welding. Electrode of 1.2 mm in diameter is also suitable for vertical-down welding. Low spatter loss, easy slag removal, finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1C H4

EN ISO 17632 - A

T46 2 P C 1 H5

TS EN ISO 17632 - A

T46 2 P C 1 H5

Rutile type flux cored wire with fast-freezing slag. Especially designed for welding with CO2 (carbondioxide) gas, in shipbuilding and steel construction. Owing to its easily controllable weld pool, electrode is well suited for positional welding with higher currents, resulting in increased deposition rates. Its special vacuum packing provides low diffusible hydrojen level in weld metal, in the case of proper handling and storage conditions. Electrode of 1.20 mm in diameter is also suitable for vertical-down welding. Low spatter loss, easy slag removal in the fillet and norrow grooves, finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1M

EN ISO 17632 - A

T46 2 P M 1

TS EN ISO 17632 - A

T46 2 P M 1

Rutile type flux cored wire, especially designed for welding in steel construction, piping, machine fabrication and shipbuilding by using mix shielding gas. Owing to it's easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Good gap-bridging property, low spatter loss, easy slag removal even in narrow grooves. Finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.36

E71T1-M21A4-CS1

AWS/ASME SFA - 5.36

E71T1-C1A2-CS1

EN ISO 17632 - A

T 46 2 P C 1 H5

EN ISO 17632 - A

T 46 3 P M 1 H5

TS EN ISO 17632 - A

T 46 3 P M 1 H5

TS EN ISO 17632 - A

T 46 2 P C 1 H5

Rutile type flux cored wire, designed for welding in steel construction, piping, machine fabrication and shipbuilding by using M21-mix gas and CO2 shielding gas. Owing to it's easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Welding in all-position is easy with a wide parameter range, especially when using mixed gas. Good gap-bridging property, low spatter loss, easy slag removal even in narrow grooves. Finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1C

EN ISO 17632 - A

T46 2 P C 1

TS EN ISO 17632 - A

T46 2 P C 1

Rutile type flux cored wire with very fast-freezing slag. Especially designed for welding with CO2 (carbondioxide) gas, in shipbuilding and steel construction. Suitable to use in lower currents and there is no spatter in 20-24V. Owing to it's very easily controllable weld pool, electrode is well suited for positional welding with higher currents, resulting in increased deposition rates. Particularly suited for welding in the horizontal-vertical position, e.g. in tank welding. Electrode of 1.2 mm in diameter is also suitable for vertical-down welding. Low spatter loss, easy slag removal, finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1C J

AWS/ASME SFA - 5.20

E71T-9C J

EN ISO 17632 - A

T46 4 P C1

TS EN ISO 17632 - A

T46 4 P C1

Rutile type flux cored wire, which has high strength and designed for welding in all position. Suitable for welding fine grained structural steels and high stregth shipbuilding steels in all position, where low heat input and less deformation are required. Has a stable and quite arc. Good gap-bridging property, low spatter loss, easy slag removal even in narrow grooves. Finely ripped pore-free welds blending into base metal without undercut.

AWS/ASME SFA - 5.20

E71T-1MJ

AWS/ASME SFA - 5.20

E71T-12MJ

AWS/ASME SFA - 5.20

E71T-9MJ

AWS/ASME SFA - 5.36

E71T1-M21A4-CS1

EN ISO 17632 - A

T46 4 P M 1 H5

TS EN ISO 17632 - A

T46 4 P M 1 H5

Rutile type flux cored wire, designed for welding applications which required good toughness values down to -40°C service temperatures, in steel construction, piping, machine fabrication, shipbuilding and especially offshore structures. Used with M21 mix shielding gas. Owing to its easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Good gap-bridging property in thick sections, has low spatter loss, finely ripped pore-free welds blending into base metal without undercut. Easy slag removal even in fillet and narrow grooves.  

AWS/ASME SFA - 5.18

E70C-GM H4

EN ISO 17632 - A

T46 3 M M 2 H5

TS EN ISO 17632 - A

T46 3 M M 2 H5

Slagless metal powder cored electrode with outstanding welding properties in the short-arc and spray arc range. Has high toughness and charpy impact resistance down to -30°C. Almost spatter-free when welding in the spray-arc range with mixed gas. Good restriking, even with cold wire tip, thus being suitable for robot application. Characteristic features high deposition rate and welding speed, good side wall fusion, finely rippled welds, without undercutting into the base metal, not even on contaminated or corroded metal surfaces. Little formation of silicates on weld surface, so that multi-pass welds can be made without cleaning. FCW 20 is well-suited for root-and positional welding and gap bridging, due to it's easily controlable weld pool in the short-arc range.

AWS/ASME SFA - 5.18

E70C-6M H4

EN ISO 17632 - A

T46 4 M M 2 H5

TS EN ISO 17632 - A

T46 4 M M 2 H5

Slagless metal powder cored electrode with outstanding welding properties in the short-arc and spray arc range. Almost spatter-free when welding in the spray-arc range with mixed gas. Good restriking, even with cold wire tip, thus being suitable for robot application. Characteristic features; high deposition rate and welding speed, good side wall fusion, finely rippled welds, without undercutting into the base metal, not even on contaminated or corroded metal surfaces. Weldmetal has a little formation of silicates on surface, so that multi-pass welds can be made without cleaning. FCW 21 is well-suited for root-and positional welding and gap bridging, due to it's easily controlable weld pool in the short-arc range.

AWS/ASME SFA - 5.20

E70T-5C H4

AWS/ASME SFA - 5.20

E70T-5M H4

EN ISO 17632 - A

T42 4 B C 3 H5

EN ISO 17632 - A

T42 4 B M 3 H5

TS EN ISO 17632 - A

T42 4 B M 3 H5

TS EN ISO 17632 - A

T42 4 B C 3 H5

Basic type flux cored wire for welding thick steel sections and dynamically loaded structures, where high toughness is required. Provides high mechanical properties and high crack resistant weld metal. Suitable to welding of boiler, tank, pressure vessel, heavy machine production and heavy constructions. Weld are metallurgically clean and are of X-ray quality. Suitable for welding high carbon steels and buffer application on worn parts before hardfacing.