EN 14700

T Fe9

TS EN 14700

T Fe9

DIN 8555

MF 7-GF-200-KPR

Open-arc flux cored wire for the rebuilding and reclamation of heavy parts, made of carbon steels or 14% Mn steels. Due to it's high crack resistance, it is succesfully used for buffer layer application prior to hardfacing on crack sensitive parts. Weld metal is very resistant to pressure and impact. Machinable with carbide tipped tools.Typical Applications: Rebuilding and reclamation of railway rails and crossovers, mill shaft drive end, buffer layer on gyratory crusher mantles, re-pointing of shovel teeth, buffer layer on crawler tractor link prior to overlaying with more abrasion resistance and crack sensitive materials, rebuilding of rollers made of low alloy steels.

EN 14700

T Fe 1

TS EN 14700

T Fe 1

Gas shielded flux cored wire, which is developed for hardfacing of parts, subjected to metal-to-metal friction wear (adhesion) and impact. The weld metal has medium hardness and machinable bu chip forming, hardening is possible by flame or by induction hardening. Due to high toughness and high crack resistance, it is also suitable for buffer layer applications. Interpass temperature should not exceed 250°C, during welding. Typical Applications: Suitable for hardfacing rollers, railway rails and crossings, rolling mills, caterpillar track rolls and pads, gears, sprockets, shafts, crane rollers and mine car wheels.

EN 14700

T Fe1

TS EN 14700

T Fe1

DIN 8555

MF 1-GF-300-P

Gas shielded flux cored wire which is developed for hardfacing of parts subjected to metal-to-metal friction wear (adhesion) and medium degree impacts. Due to it's very tough and crack resistant weld metal, it is also used for buffer layer applications. As the weld metal has medium degree of hardness it can be machined by chip forming and flame or inductive hardening is possible. Interpass temperature should not exceed 250°C, during welding.Typical Applications : Hardfacing torque gears, gear wheels, shafts, pallet reels, crane wheels, pulleys, railway rails, crossings and switch points, rollers, caterpillar tracks, sprockets, track links, gears, shafts, pinion gears in sugar industry, screws in oil industry, crane drums and wheels, mine car wheels and sheaves.

EN 14700

T Fe1

TS EN 14700

T Fe1

DIN 8555

MF 1-GF-300-P

Open-arc flux cored wire which is developed for hardfacing of parts subjected to metal-to-metal friction wear (adhesion) and medium degree impacts. Due to it's very tough and crack resistant weld metal, it is also used for buffer layer applications. As the weld metal has medium degree of hardness it can be machined by chip forming and flame or inductive hardening is possible. Interpass temperature should not exceed 250°C, during welding.Typical Applications : Hardfacing torque gears, gear wheels, shafts, pallet reels, crane wheels, pulleys, railway rails, crossings and switch points, rollers, caterpillar tracks, sprockets, track links, gears, shafts, pinion gears in sugar industry, screws in oil industry, crane drums and wheels, mine car wheels and sheaves.

EN 14700

T Fe1

TS EN 14700

T Fe1

DIN 8555

MF 1-GF-350-P

Gas shielded flux cored wire, which is developed for hardfacing of parts, subjected to metal-to-metal friction wear (adhesion) and medium degree impacts. The weld metal is tough and free of cracks and therefore resistant to shocks and impacts. Weld metal is easily machinable by chip forming. Interpass temperature should not exceed 250°C, during welding. Typical Applications: Suitable for hardfacing rollers, railway rails and crossings, rolling mills, caterpillar track rolls and pads, gears, sprockets, shafts, crane rollers and mine car wheels.

EN 14700

T Fe1

TS EN 14700

T Fe1

DIN 8555

UP 1-GF-350-P

Flux cored wire for submerged arc hardfacing of parts subjected to metal-to-metal friction wear (adhesion) and medium degree impacts. SHF 604 flux is used together with this wire for hardfacing applications. Weld metal is easily machinable by chip forming. Interpass temperature should not exceed 250°C, during welding. Typical Applications : Suitable for hardfacing rollers, railway rails and crossings, rolling mills, caterpillar track rolls and tracks, sprockets, shafts, crane rollers and ilder and mine car wheels.

EN 14700

T Fe1

TS EN 14700

T Fe1

DIN 8555

MF 1-GF-400-P

Gas shielded flux cored wire, which is developed for hardfacing of parts, subjected to metal-to-metal friction wear (adhesion) and medium to high degree impacts. Weld metal can be machinable by chip forming by means of carbide tiped tools. Interpass temperature should not exceed 250°C, during welding. Typical Applications : Suitable for hardfacing rollers, idlers, gears, sprockets, shafts, crane rollers and mine car wheels.

EN 14700

~T Fe1

TS EN 14700

~T Fe1

DIN 8555

UP 1-GF-45-P

Flux cored wire for submerged arc hardfacing of parts subjected to metal-to-metal friction (adhesion) and medium degree impacts. SHF 604 flux is used together with this wire for hardfacing applications. Weld metal is easily machinable by chip forming. Interpass temperature should not exceed 250°C, during welding. Typical Applications : Suitable for hardfacing rollers, rolling mills, caterpillar track rolls and tracks, sprockets, shafts, crane rollers and idler and mine car wheels.

EN 14700

T Z Fe2

TS EN 14700

T Z Fe2

DIN 8555

MF 1-GF-55-P

Gas shielded, high alloyed, flux cored wire designed for hardfacing deposit with high hardness. Particularly suited for wearing parts subjected to metal to metal wear (adhesion) and high impact. Weld metal is tough, free of cracks and therefore resistant to shock and impacts. Weld metal deposit is only machinable by grinding or carbide tipped tools. If the base metal has high carbon and low weldability, a tough buffer layer with FCW 30 is recommended before hardfacing. Heat treatment after hardfacing will decrease as-welded hardness.Typical Applications : Hardfacing of feeding screws, conveyors and machine parts in brick and mining industries.

EN 14700

T Fe3

TS EN 14700

T Fe3

DIN 8555

UP 6-GF-55-P

Flux cored wire for submerged arc hardfacing of parts subjected to low stress abrasion with high compression stress and high impact. SHF 604 flux is the proper flux for hardfacing applications. Due to it's high hardness weld metal is only machinable by grinding or carbide tipped tools.Typical Applications : Hardfacing of steel mill rolls, crane wheels, cable sheaves.