AWS/ASME SFA - 5.17

EL12

EN ISO 14171-A

S1

TS EN ISO 14171-A

S1

Solid, submerged arc welding wire suitable for welding general structural steels with a tensile strengths up to 510 N/mm², used in pressure vessel, pipe, shipbuilding and steel constructions. Copper coating increases electrical conductivity and resistance against rusting.

AWS/ASME SFA - 5.17

EM12

EN ISO 14171-A

S2

TS EN ISO 14171-A

S2

Solid, submerged arc welding wire suitable for welding general structural steels with medium and high tensile strengths, used in pressure vessel, boiler, pipe, shipbuilding and steel constructions. Also suitable to use in combination with SHF 325, SHF 335 and SHF 345 hardfacing fluxes for hardfacing applications. Copper coating increases electrical conductivity and resistance against rusting.

AWS/ASME SFA - 5.17

EM12K

EN ISO 14171-A

S2Si

TS EN ISO 14171-A

S2Si

Solid, submerged arc welding wire suitable for welding general structural steels with medium and high tensile strengths, used in pressure vessel, boiler, pipe, shipbuilding and steel constructions. Higher silicon content improves deoxidation of weld pool. Copper coating increases electrical conductivity and resistance against rusting.

AWS/ASME SFA - 5.17

EH12K

EN ISO 14171-A

S3Si

TS EN ISO 14171-A

S3Si

Solid, submerged arc welding wire suitable for welding general structural steels with medium and high tensile strengths, used in pressure vessel, boiler, pipe, shipbuilding and steel constructions. Higher manganese and silicon content improves deoxidation of weld pool. Copper coating increases electrical conductivity and resistance against rusting.

AWS/ASME SFA - 5.23

EA2

EN ISO 14171-A

S2Mo

TS EN ISO 14171-A

S2Mo

Mo-alloyed and solid, submerged arc welding wire suitable for welding general structural steels, low alloyed steels with medium and high tensile strengths, used in pressure vessel, boiler, tanks, pipe and heavy steel constructions. Copper coating increases electrical conductivity and resistance against rusting.

AWS/ASME SFA - 5.23

F8A8-ENi5

AWS/ASME SFA - 5.23

F8P6-ENi5

AWS/ASME SFA - 5.23

ENi5

EN ISO 14174 - A

S 50 6 FB S3Ni1Mo0.2

EN ISO 14171-A

S3Ni1Mo0.2

TS EN ISO 14174 - A

S 50 6 FB S3Ni1Mo0.2

Nickel (Ni) and Molybdenum (Mo) alloyed solid submerged arc welding wire. Used in welding general structural steels and low alloy high tensile strength steels, used in pressure vessel, boiler, off-shore and heavy steel constructions. Copper coating increases electrical conductivity and resistance against rusting.

EN ISO 14174

S A AB 1

TS EN ISO 14174

S A AB 1

Alumina-basic type, agglomerated submerged arc welding flux, which is designed for butt and fillet welding and for the single- and multi-pass butt welding of mild, medium and high tensile steels in shipbuilding and steel constructions. Provides good penetration in one-side-welding and two-side-welding processes. Has a high current carriying capacity and good operating characteristics both on alternative and direct currents. Very easy slag removal in fillet and V-groves. Smooth and clean weld beads blending into base metal. Suitable to use in steel construction, shipbuilding, tank, pressure vessel and boiler production.

EN ISO 14174

S A MS/CS 1

TS EN ISO 14174

S A MS/CS 1

Agglomerated, manganese-silicate type flux for welding general structural steels and pipe steels. Provides sound welds in steels containing low silicon and manganese. Especially suitable for fillet and groove welds in steel contructions, LPG cylinder, pressure vessel production, spirally welding of pipes. Suitable to use at high welding speeds with single and multi-wires. Possible to use both in alternative and direct currents. Good wetting properties blending into the base metal, very easy slag removal in fillet and V-grooves. Provides flat and nice weld profile without undercut. 

EN ISO 14174

S A AB 1

TS EN ISO 14174

S A AB 1

Alumina-basic type, agglomerated submerged arc welding flux, which is developed for single- and multi-wire (tandem) welding of butt and fillet joints in shipbuilding, steel constructions, storage tank and machine production. Suitable to use in single and multi pass welding in thick and thin sections. Due to it's metallurgically neutral characteristics, there is low Si and Mn pick-up from flux, it can be safely used in multi-pass applications in thick sections. Has a high current carrying capacity and possible to use both in alternative and direct currents. Provides brigth and very clean weld surface appearence with easy slag removal in fillet joints and narrow V-groves.

EN ISO 14174

S A AB 1

TS EN ISO 14174

S A AB 1

Alumina-basic type, agglomerated submerged arc welding flux, which is designed for butt and fillet welding and for the single- and multi-pass butt welding of mild, medium and high tensile steels in shipbuilding and steel constructions. Provides smooth and clean weld beads blending into base metal for fine grain structural steels and shipbuilding steels. Has a high current carrying capacity and good operating characteristics both on alternative and direct currents. Used are general structural welding, bridge fabrication, heavy equipment fabrication, and line pipe welding.