AWS/ASME SFA - 5.28

ER80S-Ni1

EN ISO 636 - A

W 46 6 W3Ni1

TS EN ISO 636 - A

W 46 6 W3Ni1

Low alloyed GTA (TIG) welding rod for steels subjected to operating temperatures down to -60°C. Weld metal has high strength and high toughness. Suitable to use in petrochemical, chemical, oil/gas industries and off-shore platforms, especially used for root and fill passes of pipes, boilers, tanks and also valves, pumps which are made of cast or forged steels.

AWS/ASME SFA - 5.28

ER80S-Ni2

EN ISO 636 - A

W 42 9 W2Ni2

TS EN ISO 636 - A

W 42 9 W2Ni2

Low alloyed GTA (TIG) welding rod for steels subjected to operating temperatures down to -90°C. Produces high strength and tough welded joints. Suitable to use in petrochemical, chemical, oil/gas industries and off-shore platforms, especially root and fill passes of pipes, boilers, tanks and also valves, pumps which are made of cast or forged steels.

AWS/ASME SFA - 5.28

ER70S-A1

AWS/ASME SFA - 5.28

ER80S-G

EN ISO 21952 - A

W MoSi

TS EN ISO 21952 - A

W MoSi

DIN M. No.

1.5424

Low alloyed GTA (TIG) welding rod for Mo-alloyed creep resisting steels, subjected to operating temperatures up to 530°C. Particularly used in root and cap passes of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER80S-D2

EN ISO 21952 - A

W Z MnMo

TS EN ISO 21952 - A

W Z MnMo

Low alloyed, GTA (TIG) welding rod for Mo-alloyed creep resisting steels, subjected to operating temperatures up to 530°C. Contains high level of deoxidizing (Mn and Si) elements to control porosity during welding. Particularly used in root and cap pass welding of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER80S-G

EN ISO 21952 - A

W CrMo1Si

TS EN ISO 21952 - A

W CrMo1Si

DIN M. No.

1.7339

Low alloyed GTA (TIG) welding rod for Cr-Mo alloyed creep resisting steels, subjected to operating temperatures up to 570°C. Particularly used in root and cap passes of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER80S-B2

EN ISO 21952 - B

W 55 1CM

TS EN ISO 21952 - B

W 55 1CM

Low alloyed, GTA (TIG) welding rod for Cr-Mo alloyed creep resisting steels, subjected to operating temperatures up to 570°C. Contains high level of deoxidizing (Mn and Si) elements to control porosity during welding. Particularly used in root and cap pass welding of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER90S-G

EN ISO 21952 - A

W CrMo2Si

TS EN ISO 21952 - A

W CrMo2Si

DIN M. No.

1.7384

Low alloyed, GTA (TIG) welding rod for Cr-Mo alloyed creep resisting steels, subjected to operating temperatures up to 600°C. Particularly used in root and cap passes of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER90S-B3

EN ISO 21952 - B

W 62 2C1M

TS EN ISO 21952 - B

W 62 2C1M

Low alloyed, GTA (TIG) welding rod for Cr-Mo alloyed creep resisting steels, subjected to operating temperatures up to 600°C. Contains high level of deoxidizing (Mn and Si) elements to control porosity during welding. Particularly used in root and cap pass welding of steam generators joints, boilers, pressure vessels and pipes, where high X-ray quality is required. Also suitable for welding carbon steel parts subsequently heat treated after welding. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER80S-B6

EN ISO 21952 - A

W CrMo5Si

TS EN ISO 21952 - A

W CrMo5Si

DIN M. No.

1.7373

Medium-alloyed GTA (TIG) welding rod for Cr-Mo alloyed creep resisting steels, subjected to operating temperatures up to 650°C. Suitable for welding 12 CrMo19-5, P5 / T5 steels in power generation and petrochemical industries. Due to it's high steam and hot hydrogen corrosion resistance, particularly used in root and cap passes of in steam generators, boilers, piping in refineries. where high X-ray quality is required. Observe directions of pre- and post-weld heat treatment of base metal.

AWS/ASME SFA - 5.28

ER80S-B8

EN ISO 21952 - A

WCrMo9

TS EN ISO 21952 - A

WCrMo9

9Cr- 1Mo alloyed GTA (TIG) welding rod for creep resisting steels, subjected to operating temperatures up to 600°C. Suitable for welding P9 / T9 steels in power generation and petrochemical industries. Due to it's high steam and hot hydrogen corrosion resistance, particularly used in root and cap passes of in steam generators, boilers, pressure vessels and piping in refineries, where high X-ray quality is required. Observe directions of pre- and post-weld heat treatment of base metal. Stick Electrode : EM 285