AWS/ASME SFA - 5.1

E6013

EN ISO 2560 - A

E 38 0 RC 11

TS EN ISO 2560 - A

E 38 0 RC 11

Especially suitable for welding in sheets thinner then 5 mm, galvanized sheets and tubes, primer painted, painted and slightly rusty steels and in production of tanks and boilers, tube installations. Very easily operated in positional welding, including vertically-down. Good gap-bridging. Smooth arc, well suited for tack-welding due to its easy arc striking and re-striking properties. Possible to use equally well both with AC and DC. Welds are smooth, slightly concave and blending into base metal without undercutting. Slag is self-releasing. 

AWS/ASME SFA - 5.1

E6012

EN ISO 2560 - A

E 38 0 RC 11

Especially suitable for welding in sheets thinner then 5 mm, galvanized sheets and tubes, primer painted, painted and slightly rusty steels and in production of tanks and boilers, tube installations. Very easily operated in positional welding, including vertically-down. Good gap-bridging even at wide root openings. Smooth arc, well suited for tack-welding due to its easy arc striking and re-striking properties. Possible to use equally well both with AC and DC. Welds are smooth and blending into base metal without undercutting.

AWS/ASME SFA - 5.1

E6013

EN ISO 2560 - A

E 42 0 RR 12

TS EN ISO 2560 - A

E 42 0 RR 12

Suitable for joining and repair welding of light steel fabrications, iron works, wrougth iron works, agricultural machines, boiler, chassis of vechiles. Suitable for all position except vertical-down. Particularly suited for the welding of horizontal fillets. Very smooth weld bead appearance, with easy arc striking and re-striking properties, quite and stable arc with fine-droplet metal transfer. Possible to use equally well both with AC and DC. Slag is completely self-releasing.

AWS/ASME SFA - 5.1

E6013

EN ISO 2560 - A

E 35 A R 12

Preferably used for welding light-gauge sheet metal. Suitable for all position except vertical-down. In fillet welds, electrode can be welded with tip lightly dragging on the work. Has excellent bead appearence, easy arc striking and re-striking, easy slag removal, silent and balanced arc. Possible to use equally well both with AC and DC.

AWS/ASME SFA - 5.1

E7014

EN ISO 2560 - A

E 42 0 RR 12

TS EN ISO 2560 - A

E 42 0 RR 12

Preferably used in mild steel fabrication, sheet metal and ornamental iron works on poor fitup joints. Due to its iron powder addition in covering, particularly suited for the welding of horizontal fillets grooves with higher speed. Suitable for all position welding except vertical-down. High current carrying capacity, low spatter. Quite, stable arc characteristics with fine and fast droplet metal transfer. Very easy arc striking and re-striking. Very smooth welds blending into base metal without undercuts. Slag is completely self-releasing. Possible to use equally well both with AC and DC.

AWS/ASME SFA - 5.1

E6013

EN ISO 2560 - A

E 38 A RR 12

TS EN ISO 2560 - A

E 38 A RR 12

Rutile type heavy coated electrode which is especially used in fabrication and repair welds of molten zinc bath made of Armco iron and very low carbon steels. Weld metal ensures high crack resistance against the effect of molten zinc. Possible to use equally well both with AC and DC.

AWS/ASME SFA - 5.1

E6013

EN ISO 2560 - A

E 38 2 RB 12

TS EN ISO 2560 - A

E 38 2 RB 12

Rutile-basic type coated electrode, particularly suitable for welding root passes and positional welding in fabrication of pipes, boilers and tanks. Also suitable for depositing backing-up beads in submarged arc welding. Owing to its low Si-content, weld metal is suited for subsequent galvanizing and enamelling.

AWS/ASME SFA - 5.1

E7016

EN ISO 2560 - A

E 42 3 B 32 H10

TS EN ISO 2560 - A

E 42 3 B 32 H10

Suitable for repair welding on difficult to weld steels and repair welding of steel with unknown composition. Heavy coated basic electrode produce high tensile strenght weld metal with excellent toughness values makes this electrode suitable for welding restrained structural members and large weld cross sections. Also preferred for buffer layer applications on steels before hardfacing and for welding of cast irons with high preheat.

AWS/ASME SFA - 5.1

E7016 H8

EN ISO 2560 - A

E 42 4 B 12 H10

TS EN ISO 2560 - A

E 42 4 B 12 H10

Multi-purpose electrode for assembly work, workshop and maintenance welding. Particularly used for repair welding of earthmoving equipment booms and approved for rail joint welding. Suitable for root passes as well as positional welding. Owing to its double covering, electrode has a stable and concentrated arc. Smooth and clean welds, merging into base metal without undercuts. Good gap bridging properties. Welds are of X-ray quality.

AWS/ASME SFA - 5.1

E7016 H8

EN ISO 2560 - A

E 38 2 B 12 H10

TS EN ISO 2560 - A

E 38 2 B 12 H10

Suitable for fabrication and repair welding of dynamically loaded steel constructions, machines and agricultural equipments, workshop and maintenence welding. Smooth and clean welds, blending into base metal without undercuts. Excellent gap bridging properties. The double covering of this electrode produces a stable, concentrated and directed arc, thus being ideally suited for root pass and positional welding and is suited for AC welding. Welds are of X-ray quality.