Magmaweld reserves the right to make changes to images and written content without prior notice.

MONOMIG 200IK

MONOMIG 200IK - COMPACT

Operates with 1 Phase 230V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
Due to inverter technology, energy efficiency is higher than the conventional machines.
Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
Welding Voltage, Wire Feeding Speed, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings and 2/4 Trigger options are adjusted on the front panel.
Large digital displays for easy monitoring welding parameters.
Manual wire feeding and gas valve buttons.
ø300 mm, ø270 mm and ø200 mm spools, drums of any size and ø100 mm spool with a spool gun can be used.
Built in gas cylinder platform with large wheels to ease mobility in workshops.
Fan cooling and thermal protection against overheating.
Standard accessories come with the machine.

Power Source
Mains Voltage (1Ph)	230	V
Input Power from Mains	8.6 (%16)	kVA
Power Source Efficiency	83,13	%
IDLE State Power Consumption	N/A (EN IEC 60974-1,Annex M)	W
Welding Current Range	30 - 200	A
Nominal Welding Current	200 (%16)	A
Open Circuit Voltage	52	V
Dimensions (l x w x h)	888 x 455 x 870	mm
Weight (Net)	48	kg
Protection Class	IP21
Wire Feeder System
Standard Roller Groove Size	0.80 - 1.00	mm
Welding Wire Diameter	0.60 - 1.00	mm
Wire Feeder Roller Diameter	2x37	mm
Wire Feeding Speed	1 - 24	m/min
Torch Trigger Control	2 / 4
Weight (Net)	15	kg

Product Brochure

PDF

Operating Manual

PDF Search

Additional Documents

Approvals & Certificates

CE EAC Turkish Product

Code	Dimension	View
521K2000M0	MONOMIG 200IK - COMPACT	View
521K2000M1	MONOMIG 200IK - Compact, 3m Torch, Mix Gas Regulator	View