SF 124

Datasheet

Standards

EN ISO 14174	S A AB 1
TS EN ISO 14174	S A AB 1

Özellikleri Ve Uygulama Alanları

Alumina-basic type, agglomerated submerged arc welding flux, which is developed for single- and multi-wire (tandem) welding of butt and fillet joints in shipbuilding, steel constructions, storage tank and machine production. Suitable to use in single and multi pass welding in thick and thin sections. Due to it's metallurgically neutral characteristics, there is low Si and Mn pick-up from flux, it can be safely used in multi-pass applications in thick sections. Has a high current carrying capacity and possible to use both in alternative and direct currents. Provides brigth and very clean weld surface appearence with easy slag removal in fillet joints and narrow V-groves.

Approvals & Certificates

RMRS

Kaynak Metalinin Tipik Kimyasal Özellikleri

Welding Wire	Type of Analysis	C	Si	Mn	Mo
SW 702	Weld Deposit	0.05	0.20	1.10
SW 702Mo	Weld Deposit	0.07	0.25	1.25	0.40
SW 702Si	Weld Deposit	0.05	0.30	1.20
SW 703Si	Weld Deposit	0.06	0.45	1.75

Kaynak Metalinin Tipik Mekanik Özellikleri(%)

Test Şekli	Welding Wire	Akma Dayanımı (N/mm²)	Çekme Dayanımı (N/mm²)	Elongation A5 (%)	Çentik Darbe Dayanımı ISO-V (J)
Kaynak Sonrası	SW 702	430	490	30	-20°C → 70	-40°C → 40
Kaynak Sonrası	SW 702Mo	520	610	26	0°C → 70	-20°C → 55	-30°C → 40
Kaynak Sonrası	SW 702Si	435	500	27	-20°C → 90	-30°C → 70	-40°C → 50
Kaynak Sonrası	SW 703Si	440	550	30	-30°C → 90	-40°C → 70

Tel-Toz Kombinasyonlarının Standartları

Welding Wire	Telin EN Gösterimi	EN ISO/TS EN ISO 14171 - A	Telin AWS Gösterimi	AWS/ASME SFA 5.17/SFA 5.23
SW 702	S2	S 42 2 AB S2	EM12	F7A4-EM12
SW 702Mo	S2Mo	S 46 2 AB S2Mo	EA2	F8A2-EA2
SW 702Si	S2Si	S 42 3 AB S2Si	EM12K	F7A4-EM12K

Application Information

Kullanılabilecek Kaynak Pozisyonları :

Polarity:

DC(+)

Welding Parameters & Efficiency :

Packaging Information

Ürün Kodu	Kutu Ağırlığı (kg)	Number Of Boxes Per Package	Koli Ağırlığı	Packaging Type
401030AGM2	25.0	1	25.6	Kraft Bag

Storage & Re-Drying Information

>The total drying duration should not exceed 10 hours ( also for repeated drying).

>During transportation and storage, it should be ensured that the packaging is not damaged or torn.

>It has to be dried at 350°C for 2 hours.