SF 204


EN ISO 14174 S A AB 1
TS EN ISO 14174 S A AB 1

Approvals & Certificates


Properties and Applications

Agglomerated semi-basic flux for welding carbon and low alloy steel in single or multipass technique and with single or multi-wire applications. Suitable for use in production of pressure vessel, pipe, boiler, tank, LPG bottles, steel construction and in shipbuilding. The weld metal, produced in combination with corresponding wire electrodes, offers good mechanical properties also at low temperatures. Good slag removal in fillet and groove welds. Possible to use both in alternative and direct currents.  
Sf 204 Sert Dolgu

Typical Chemical Values of Weld Metal

Welding WireType of AnalysisCSiMnMo
SW 701Weld Deposit0.030.401.30 
SW 702Weld Deposit0.050.401.40 
SW 702 MoWeld Deposit0.060.451.300.40
SW 702SiWeld Deposit0.060.551.35 
SW 703SiWeld Deposit0.060.601.70 

Typical Mechanical Values of Weld Metal(%)

Test ConditionWelding WireYield Strength (N/mm²)Tensile Strength (N/mm²)Elongation A5 (%)Charpy V-Notch Properties (J)
As weldedSW 70141047030-20°C → 75-30°C → 30 
As weldedSW 70243551030-20°C → 90-30°C → 70-40°C → 50
As weldedSW 702 Mo52061028-20°C → 90-30°C → 60-40°C → 50
As weldedSW 702Si44053029-30°C → 70-40°C → 40 
As weldedSW 703Si51061028-20°C → 120-30°C → 100-40°C → 60

Wire-Flux Combinations Standards

Welding WireEN Designation of WireEN ISO/TS EN ISO 14171 - AAWS Designation of WireAWS/ASME SFA 5.17/SFA 5.23
SW 701S1S 35 2 AB S1EL12F6A2-EL12
SW 702S2S 42 3 AB S2EM12F7A2-EM12
SW 702 MoS2MoS 46 2 AB S2MoEA2F8A4-EA2
SW 702SiS2SiS 42 3 AB S2SiEM12KF7A4-EM12K
SW 703SiS3SiS 46 3 AB S3SiEH12KF7A4-EH12K

Application Information

Welding Positions :
Sf 204 Kaynak Pozisyonu Sf 204 Kaynak Pozisyonu Sf 204 Kaynak Pozisyonu


Sf 204 Kutuplama DC(+)

Welding Parameters & Efficiency :

Packaging Information

Product CodeWeight Of The Box (kg)Boxes Per PackageWeight Of The PackagePackaging Type
401080AGM225.0125.6Kraft Bag

Storage & Re-Drying Information

>The total drying duration should not exceed 10 hours ( also for repeated drying).
>During transportation and storage, it should be ensured that the packaging is not damaged or torn.
>It has to be dried at 350°C for 2 hours.