SF 304

Standards

EN ISO 14174 S A AB 1
TS EN ISO 14174 S A AB 1

Properties And Applications

Alumina-basic type, agglomerated submerged arc welding flux, developed particularly for spiral and longitudinal welding of pipes. It gives the possibility of high-speed welding in the welding of thin and medium thick pipes by single or multi-wires (tandem/twin). Bead appearence is good. Especially in pipe welding, inner and outher welds are smooth and provide necessary penetration. It has high current carrying capacity and can be used in alternative and direct currents. Provides smooth weld beads, good weld bead appearance with high penetration.

Materials

EN API
S275N - S460N X42 - X70
S235JR - S355JR L290 - L485
S235J0 - S355J0
S235J2 - S355J2 - S355K2

Welding Flux Information

Type of Welding Flux Basicity
AB (Alumina-Basic) ~ 1.90 Semi-Basic

Typical Chemical Values of Weld Metal

Welding WireType of AnalysisCSiMnMo
SW 701Weld Deposit0.050.250.90-
SW 702Weld Deposit0.050.251.25 
SW 702MoWeld Deposit0.050.351.400.45
SW 702SiWeld Deposit0.060.451.40 
SW 703SiWeld Deposit0.060.651.75 

Typical Mechanical Values of Weld Metal(%)

Test ConditionWelding WireYield Strength (N/mm²)Tensile Strength (N/mm²)Elongation A5 (%)Charpy V-Notch Properties (J)
As weldedSW 701420490300°C → 100-20°C → 80-30°C → 60
As weldedSW 70242050029-20°C → 110-30°C → 75-40°C → 60
As weldedSW 702Mo51057027-20°C → 100-30°C → 60-40°C → 50
As weldedSW 702Si46053028-20°C → 90-30°C → 70-40°C → 50
As weldedSW 703Si48054028-20°C → 120-30°C → 80-40°C → 55

Wire-Flux Combinations Standards

Welding WireEN Designation of WireEN ISO/TS EN ISO 14171 - AAWS Designation of WireAWS/ASME SFA 5.17/SFA 5.23
SW 701S1S 38 2 AB S1EL12F6A0-EL12
SW 702S2S 42 3 AB S2EM12F7A4-EM12
SW 702MoS2MoS 46 3 AB S2MoEA2F8A4-EA2
SW 702SiS2SiS 42 3 AB S2SiEM12KF7A4-EM12K
SW 703SiS3SiS 46 4 AB S3SiEH12K F7A4-EH12K

Application Information

Welding Positions :
Sf 304 Kaynak Pozisyonu Sf 304 Kaynak Pozisyonu Sf 304 Kaynak Pozisyonu

Polarity:

Sf 304 Kutuplama DC(+)

Welding Parameters & Efficiency :

Packaging Information

Product CodeWeight Of The Box (kg)Boxes Per PackageWeight Of The PackagePackaging Type
401010AGM225.0125.6Kraft Bag

Storage & Re-Drying Information

>The total drying duration should not exceed 10 hours ( also for repeated drying).
>During transportation and storage, it should be ensured that the packaging is not damaged or torn.
>It has to be dried at 350°C for 2 hours.