TI 2209

Datasheet

Standards

AWS/ASME SFA - 5.9	ER2209
EN ISO 14343 - A	W 22 9 3 N L
TS EN ISO 14343 - A	W 22 9 3 N L
DIN M. No.	~1.4462

Properties And Applications

Dublex (ferritic-austenitic) stainless steel welding rod for GTA (TIG) welding of dublex Cr-Ni-Mo stainless steels. Especially used in welding of acid tanks and pipes, in chemical, petrochemical, paper, shipbuilding and desalination industries. Suitable also for welding dublex stainless steels to carbon steels. The high-strength and ductile weld metal exhibits good resistance to pitting, crevice corrosion and stress corrosion cracking in chloride-bearing media. Suitable for operating temperatures of up to 250°C.

Materials

Width	Material
X2CrNiMoN 22-5-3	1.4462
X10CrNiMoNb18-12	1.4583

Typical Chemical Features of the Welding Wire

Type of Analysis	C	Si	Mn	Cr	Ni	Mo	N
Welding Wire	0.01	0.45	1.45	23.00	8.50	3.25	0.15

Type of Analysis

Welding Wire

0.01

0.45

1.45

23.00

8.50

3.25

0.15

Typical Mechanical Values of Weld Metal(%)

Test Condition	Protection Gas	Yield Strength (N/mm²)	Tensile Strength (N/mm²)	Elongation A5 (%)	Charpy V-Notch Properties (J)
As welded	I1	640	810	20	20°C → 150	-40°C → 120	-60°C → 100

Test Condition

Protection Gas

Yield Strength (N/mm²)

Tensile Strength (N/mm²)

Elongation A5 (%)

Charpy V-Notch Properties (J)

As welded

640

810

20°C → 150

-40°C → 120

-60°C → 100

* Chemical compositon and mechanical properties are valid when using shielding gas EN ISO 14175 - I1 (%100 Ar) .

Application Information

Welding Positions :

Polarity:

Protection Gas:

Welding Parameters & Efficiency :

Diameter x Length (mm)
1.60x1000
2.00x1000
2.40x1000

Diameter x Length (mm)

1.60x1000

2.00x1000

2.40x1000

Packaging Information

Product Code	Diameter x Length (mm)	Quantity per Box	Kutu Brüt Ağırlığı (kg)	Boxes per Outer Box	Koli Ağırlığı (kg)	Packaging Type
23112GBKM2	1.60x1000	5 kg	5.30	4	21.40	Cardboard Tube
23112HBKM2	2.00x1000	5 kg	5.30	4	21.40	Cardboard Tube
23112IBKM2	2.40x1000	5 kg	5.30	4	21.40	Cardboard Tube

Storage & Re-Drying Information

>Shouldn t be exposed to high statical load and impact.