Hardfacing open-arc flux cored wire which is developed for hardfacing of parts subjected to especially high gouging abrasion and low degree impact. Weld metal deposit is composed of an austenitic matrix and Cr and Nb complex carbides so, will readily stress relief check crack which is not detrimental to abrasion resistance, but decrease impact resistance. Weld metal has high hardness and excellent wear resistance even in single pass due to In order to have good results, maximum 2 passes shall be welded.
Typical Applications : Suitable for hardfacing of pumps and mixer parts, conveyer screws, bulldozer blades, shovel bucket, lips and teeths, brick and clay mill augers, wear plates and screens in mineral, stone, sand and coal mines.