Gas-shielded (MIG/MAG) welding wire producing stainless steel weld metal, developed for welding equipment and components manufactured from ferritic stainless steels. It is widely used in the automotive industry, particularly for exhaust system components, as well as in white goods such as appliance casings, kitchen equipment, metal furniture, and architectural applications, including roofing and staircases. The weld metal exhibits high resistance to atmospheric corrosion and mildly corrosive environments. The niobium (Nb) content prevents grain growth and improves weldability.
Austenitic stainless steel wire electrode for GMA (MIG/MAG) welding of dissimilar steels, difficult to weld steels, armour plates, high manganese steels, rails, crossovers. Suitable also for depositing stress relaxing buffer layers on crack sensitive base metals and hardfacing jobs, e.g. crane wheel surfacing where high degree of pressure and dynamical loads exists. Weld metal has a high degree of corrosion resistance and resistant to operating temperatures up to 300°C and non-scalling up to 850°C. Observe welding procedures, preheating temperature and avoid high admixture of base metal.
Austenitic stainless steel welding wire for GMA (MIG/MAG) welding of unstabilized or stabilized corrosion resisting Cr-Ni steels tanks, pipes and equipments used in food beverage and pharmaceutical industry. Resistant to intergranular corrosion up to 350°C. Non-scaling up to 800°C, in air or oxidizing combustion gasas.
Austenitic-ferritic wire electrode for GMA (MIG/MAG) welding of dissimilar joints of stainless steels to unallyoed or low-alloyed steels, subjected to operating temperatures up to 300°C. Suitable to use also as buffer layer on carbon steel before welding with 308 and 308L to reach 304 and 304L layer. Low carbon content increases resistance to intergranular corrosion.
Fully austenitic stainless steel wire electrode for GMA (MIG/MAG ) welding of heat resistant steels, containing approx. 25% chromium and 20% nickel, which are used in heat treatment and industrial furnaces and equipments, like cement and steel industries. Also suited for welding heat resistant and scaling resistant ferritic chromium steels, provided that corrosion attack by reducing sulphur-bearing combustion gases is not be expected. Weld metal exhibits good toughness down to -196°C and non-scaling up to 1200°C
Austenitic-ferritic stainless steel wire electrode for GMA (MIG/MAG) welding of dissimilar steels and and depositing buffer layers on ferritic steels. It features high resistance to cracking and toughness, is therefore suited for joining difficult to weld steels and depositing stress-relaxing buffer layers on crack sensitive base metals. Weld metal is non-scaling up to 1100°C. Especially used in die and tool repair, crack repairs in difficult to weld steels, gear teeth repair and rebuilding, buffer layer application on cutting blades. Suitable also for welding galvanized steel plates.
Austenitic stainless steel wire electrode for GMA (MIG) welding of unstabilized or stabilized corrosion resisting Cr-Ni-Mo steels. Resistant to intergranular corrosion up to 400°C. Especially used in welding chemical tanks, pipes and equipments which are used in chemical, petrochemical, paint, textile, paper and shipbuilding industries, etc.
Stabilized austenitic stainless steel wire electrode for GMA (MIG/MAG) welding of unstabilized and stabilized corrosion resistant Cr-Ni steels, used in food, beverage, chemical and pharmacutical industries. Stabilized with Nb (Niobium) and resistant to intergranular corrosion. Weld metal is suitable for operating temperatures of up to 400°C, non-scaling up to 800°C , in air and oxidizing combustion gases.
Fully-austenitic stainless steel wire electrode for GMA (MIG/MAG) welding of unstabilized or stabilized corrosion resisting Cr-Ni-Mo alloyed stainless steels like; 904L/1.4539. Especially used in flue gas desulphurization plants, fertilizer plants, sea water transfer fittings, petrochemical, paper and pulp industries, etc. Due to high Ni, Mo and low C content, weld metal has high resistant to intergranular, pitting, crevice and stress corrosion types in chloride containing solutions, phosphorus-, sulphur-, acetic-, formic acids, sea water. Stick Electrode : EI 385TIG Welding Rod: TI 385