Low-alloy wire electrode for welding of Cr-Mo alloyed creep resistant boiler and pipe steels subjected to operating temperatures up to 570°C. Contains high level of deoxidizing (Mn and Si) elements to control porosity during welding. Also suitable for joining C-Mn steels to be postweld heat treated. Observe directions as to pre and post weld heat treatment of base material.
T 69 4 Mn2NiCrMo M M21 1 H5
690 N/mm² metal-cored welding wire developed for welding fine grained structural steels with yield strength up to 690 N/mm². It gives non-porous weld seams with low spatter, high metal deposition rate and uniform seam.
Low-alloy wire electrode for welding of Cr-Mo alloyed creep resistant boiler and pipe steels subjected to operating temperatures up to 570°C. Contains high level of deoxidizing (Mn and Si) elements to control porosity during welding. Also suitable for joining C-Mn steels to be postweld heat treated. Observe directions as to pre and post weld heat treatment of base material.
Rutile type flux cored wire, designed for welding fine grained structural steels. Succesfully used in single and multi-run welding of especially in steel construction, bridge, offshore platform, shipbuilding and pipe laying. Owing to its easily controllable weld pool and fast freezing slag suited for welding in all position easily. It's metal recovery provides ability of good gap bridging and filling property. Because of nickel alloy, weld metal yield and tensile strength is high and weld metal is proper to use on fine grained steels at operating temperatures +450°C down to -40°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag, generally self removed.
Rutile type flux cored wire, designed for welding fine grained structural steels by using M21 mix shielding gas. Succesfully used in single and multi-run welding in steel construction, bridge, offshore platform, shipbuilding and pipe laying. Owing to it's easily controllable weld pool and fast freezing slag, suited for welding in all position easily. It's metal recovery provides ability of good gap bridging and filling property. Because of nickel alloy, weld metal yield and tensile strength is high and weld metal is proper to use on fine grained steels at operating temperatures 450°C down to -40°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag and generally self removed.
Rutile type flux cored wire, which is especially designed for welding weathering steels (like COR-TEN steels), high strength and fine grained structural steels. Suitable for welding in steel construction in single and multi-run welding in all position. Owing to it's easily controllable weld pool and fast freezing slag particularly suited for welding in all position. Has a stable and quite arc with low spatter loss.
Nickel-Copper alloyed, metal-cored wire for single or multilayer welding of corrosion resistant steels with Ar-CO2 shielding gas. Characteristically has high efficiency, good weldability, excellent seam appearance and low spatter losses. Good mechanical properties at low temperatures. This wire is particularly suitable for bridge constructions and chimneys.
Rutile type flux cored wire, designed for welding fine grained structural steels by using CO2 shielding gas. Succesfully used in single and multi-pass welding in steel construction, offshore platform, shipbuilding and pipe laying. Provides weld metal with high toughness, down to -60°C. Diffusible hydrogen content is 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc with low spatter loss. Has easily removable slag and generally self removing.
Rutile type flux cored wire, designed for welding fine grained structural steels by using M21 - mix shielding gas. Succesfully used in single and multi-pass welding in steel construction, offshore platform, shipbuilding and pipe laying which need high strength and toughness at low temperatures. Provides weld metal with high toughness, down to -60°C. Diffusible hydrogen content is; 5 ml per 100 g deposited weld metal, so highly resistant to cold cracking. Has a stable and quite arc without spatter. Has easily removable slag and generally self removing.