Log in -
Mig/Mag Welding Machines
Rs 450 Mw Pro
RS 450 MW PRO
RS 450 MW-5 PRO/522P45W210
Add to Basket
Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
Intelligent control of temperature reduces energy consumption and extends the fan and machine life. (SmartFan)
Sleep Mode to save energy if there is no activity in 7 minutes.
Separate wire feeding units are standard. Closed Cabinet and Small-D200 (5Kg) Spool Wire Feeder.
Powerful Digital Displays are closer to the welder.
4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.
The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.
Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.
Wire feed speed adjustment, 2/4 trigger selection, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer adjustments are through the red knob and membrane switch (M) on the wire feeding penal. During welding, voltage and current are monitored on digital displays.
Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.
Manual wire feeding & gas valve buttons are in the wire feeding cabinet.
ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
24V AC outlet for CO2 gas heater.
Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.
Built in gas cylinder platform with large wheels to ease mobility in workshops.
For water-cooled (W) models, provides powerful water cooling up to 50 m distance & 40ºC ambient temperature.
Standard accessories come with the machine.
Mains Voltage (3Ph)
Welding Current Range
85 - 450
Nominal Welding Current
Open Circuit Voltage
20 - 57
Voltage Adjustment Steps
3 x 10
Dimensions (l x w x h)
Wire Feeder System
Welding Wire Diameter
0.80 - 2.00
Standard Roller Groove Size
1.00 - 1.20
Wire Feeder Roller Diameter
Wire Feeding Speed
1 - 24
Torch Trigger Control
2 / 4
Ground Clamp And Cable
70mm2/5mt (35 socket)
LAVA MIG 50W-3
450A (%100 CO2) - 3m
W21,8x1/14'' ALTTAN AYARLI
G5/8'' ALTTAN AYARLI
Wire Feed Unit Quick User Manual
Approvals & Certificates
Ürün başarılı bir şekilde sepete eklenmiştir.