Unalloyed wire electrode for GMA (MIG/MAG) welding of unalloyed steels using CO? or mixed gases, depending on the thickness of the base metal. Characterized by reduced slag formation and a smooth welding deposit. Particularly suitable for welding galvanized and pre-painted steels, as well as for welding unalloyed steels in pipelines, boilers, and tank construction. Also suitable for welding thin metal plates and performing repair welds. A thin and homogeneous copper coating increases electrical conductivity and protects the wire from wear.
Unalloyed wire electrode for GMA (MIG/MAG) welding of general structural steels, pipe steels, and cast steels using CO? or mixed shielding gases, depending on the thickness of the base metal. Commonly used in steel construction, shipbuilding, machinery, tank and boiler production, and the automotive industry. Preheating may be required depending on the plate thickness and the carbon equivalent of the base metal. A thin and homogeneous copper coating increases electrical conductivity and protects the wire from rusting.
Unalloyed wire electrode for GMA (MIG/MAG) welding of general structural steels, pipes, and cast steels using CO? or mixed shielding gases, depending on the thickness of the base metal. Commonly used in steel construction, machinery, tank, and boiler production. Preheating may be required depending on the plate thickness and carbon equivalent of the base metal. A thin and homogeneous copper coating increases electrical conductivity and protects the wire from rusting.
Non-copper coated and unalloyed GMA (MIG/MAG) wire electrode, especially produced for welding without spatter or very low level of spatter. Suitable for welding of general structural steels, boiler steels, pipe steels and cast steels. Due to it's special coating provides stable arc and no spatter especially with mixed shielding gases which can be used depending on the thickness. Generally preferred in robotic applications, due to it's high welding performance without spatter and cleaning needs. Also provides cost advantages in cleaning after welding, torch spare part consumptions like, contact tip, spiral, driving wheel, anti-spatter sprey. Due to these advantages preferably used in automotive, machine and steel furniture production.
Non-copper coated and unalloyed GMA (MIG/MAG) wire electrode, especially produced for welding without spatter or very low level of spatter. Suitable for welding of general structural steels, boiler steels, pipe steels and cast steels. Due to it's special coating provides stable arc and no spatter especially with mixed shielding gases which can be used depending on the thickness. Generally preferred in robotic applications due to it's high welding performance without spatter and cleaning needs. Also provides cost advantages in cleaning after welding, torch spare part consumptions like, contact tip, spiral, driving wheel, anti-spatter sprey. Due to these advantages preferably used in automotive, machine and steel furniture production.
Micro-alloyed wire electrode for GMA (MIG/MAG) welding of unalloyed and low-alloy steels. Characterized by a reduced slag formation and smooth welding deposit. Due to its Al and Ti micro-alloy content, particularly suitable for single pass welding of galvanized, pre-painted, rusty and dirty steels, welding low alloy steels in pipe-lines, boilers and tank production. Suitable also welding in thin metal plates and repair welds. CO2 or mixed shielding gases can be used depending on the thickness of the base metal. A thin and homogeneous copper coating increases electrical conductivity and protects the wires from rusting.